EasyManua.ls Logo

Corbin 39 - e) ANCHORS; f) CAPSTANS

Default Icon
159 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
All sheaves should have a backing!
plate.!
e) ANCHORS!
We believe that your main anchor should be either!
a 35 or 45 lbs. "CQR" or "Kingston Plow Anchor" with a!
minimum of 150 feet of chain. We prefer 250 feet of!
chain. You should also have two other anchors on board.!
We suggest a "Bruce" with 10 feet of chain and 350 feet!
of cable, and possibly a "Danforth 10-S" on cables. The!
ideal is to have four or five anchors of different types!
on board.!
f) CAPSTANS !
ELECTRICAL
You can purchase electrical or manual capstans.!
Most of the electrical capstans use a starter from a!
truck as the power source. They consume a lot of power!
and should be wired properly using "00" wire.' If you!
buy one of these, consider the cost of the wiring as!
well as the starter. We have installed many "Galley!
Maid" units made in Florida. This company soils a!
vertical model which is well adapted to the Corbin 39.!

Table of Contents