Corby Westminster - Reading Safe Records; 2. Setclock; Menu on the CEU; Turn off the CEU

15
SECTION 02
USE
TURN ON THE CEU
Put 4x AAA batteries in the CEU.
Press and hold for 2 seconds.
TURN OFF THE CEU
Press and hold for 2 seconds.
MENU ON THE CEU
1. Records
1. ReadRecord
2. CheckRecord
3. DeleteRecord
2. SetClock
1. SetClock
2. SynClock
3. SetAdminCode
1. ModifyCasePin
2. ModifyCeuPin
4. OpenSafe
5. SetLamp
6. PrintRecords*
7. CommMode
1. IO-A
2. IO-B
3. USART
4. PC
SET CLOCK
Important: To ensure accurate data records the clock on CEU must be set and
synchronised with the safe box when installed.
(1) Press ▼ or ▲ on CEU to choose 7.CommMode, and press OK to enter
submenu. Then press ▼ or ▲ and choose 1. IO-A, and press OK.
(2) Connect CEU to safe using Micro USB Cable. After CEU turns on, Press ▼ or ▲
to choose 2.Setclock, and press OK to enter into submenu.
(3) Press ▼ or ▲ to choose 1.SetClock and press OK to set time.
A. Input number to set date and time
B. Press OK to save setting and return back to main menu
(4) Press ▼ or ▲ to choose 2.SynClock, and press OK to synchronize time
between CEU and safe.
(5) Press return back to main menu.
READING SAFE RECORDS
(1) Press ▼ or ▲ on CEU to choose 7.CommMode, and press OK to enter
submenu. Then press ▼ or ▲ and choose 1. IO-A, and press OK.
(2)
Connect CEU with safe using Micro USB Cable. After CEU turns on, press ▼ or
▲ to choose 1.Records, and press OK to enter into submenu.
* Direct printing from CEU not available on
this model. To print records see page 8.