07
SECTION 03
INSTALLATION
Always bolt your Safe down
(1) Choose a location for the Safe that is preferably concealed from view
(2) Take care that there is sufficient floor load bearing capacity.
(3) If installing the Safe in a cupboard or closet, make sure that its load bearing
capacity is sufficient and that a secure anchorage point can be made through
to the wall or floor.
(4) Make sure that there is no plumbing or wiring below or behind the chosen
location.
(5) Use more than one fixing point to secure the safe.
(6) When the Safe is to be anchored to a wood floor, ensure at least one of the
anchorage points is into a joist/support beam rather than just the floorboards.
A
Safe Door
A
B
Using the provided
fixings, fix the safe to
a wall (A) or the floor (B)
Safe Door
Top Opening Safe
Mayfair / SFE0006 / CT-1340UZH
Front Opening Safe
Westminster / SFE0003 / 5323
Whitehall / SFE0004 / 2042A-1
To Next Page
Loading...