16
SECTION 02
(3) Press ▼ or ▲ on CEU to choose 1.ReadRecord, and press OK. This will copy the
safes records to the CEU. Note: Only one safes data can be stored on the CEU at a
time.
(4) The CEU can now be disconected from the safe.
(5) To view the records stored on the CEU enter the 1.Records menu, then press ▼
or ▲ to choose 2.CheckRecord, and press OK to view the records stored on the
CEU. Use ▼ or ▲ to scroll through the records. Press to return back to previous
menu.
(6) To view the view the records on a PC follow the instructions on Page 6
Communication With PC.
(7) To delete the records stored on the CEU enter the 1.Records menu, then press
▼ or ▲ to choose 3.DeleteRecord, press OK to delete the data.
SET SAFE ADMIN CODE
IMPORTANT: It is not necessary to change administration
code. The code is used for communication between the CEU
and safe. The safe and CEU admin codes must be the same,
otherwise the CEU will not be able to read the records from
the safe. If changing the administration code, keep a record
of the new code and the old code.
(1) Press ▼ or ▲ on CEU to choose 7.CommMode, and press OK to enter submenu.
Then press ▼ or ▲ and choose 1. IO-A, and press OK.
(2) Connect CEU with safe using Micro USB Cable. After CEU turns on, press ▼ or ▲
to choose 3.SetAdminCode, and press OK to enter into submenu.
(3) Choose 1. ModifyCasePin and press OK to modify case pin.
(4) Input 6 digit factory setting manager code (123456)and press OK.
(5) Input new 6 digit code and press OK.
(6) Input the new 6 digit code again. The screen will show success or failure.
SET CEU ADMIN CODE
(1) Turn on CEU, press ▼ or ▲ to choose 3.SetAdminCode, and press OK to enter
into submenu.
(2) Press ▼ or ▲ to choose 2. ModifyCeuPin, press OK to modify CEU pin.
(3) Input 6 digit code, and press OK. Please make sure the CEU pin is the same as
the safe admin code.
OPEN SAFE
(1) Connect CEU with safe using Micro USB Cable.
(2) Choose 4. OpenSafe and press OK. The safe door will open.
To Next Page
Loading...