Need help?Do you have a question about the Cornelius IWC630 and is the answer not in the manual?
Outlines the responsibilities of the original owner and end-user for the ice maker.
Describes the locations of serial plates on the ice maker unit.
Explains how to interpret the model and serial number format.
Details refrigerant type and compressor electrical data.
Outlines the procedure to check and measure ice production rates.
Details the step-by-step operational sequence of the ice maker.
Describes the functions of key components within the ice maker system.
Identifies specific LEDs and their corresponding functions or status.
Instructions for resetting the ice maker after an error condition.
Explains how to select the correct voltage for the ice maker.
Explains how the condenser fan cycles on integral air-cooled units.
Details the safety termination feature for the harvest mode.
Explains the function of evaporator proximity switches and their signals.
Explains the function and adjustment of the water regulating valve.
Lists common product symptoms associated with a starving TXV.
Lists common product symptoms associated with a flooding TXV.
Provides a procedure for checking compressor and starting components.
Explains the function of potential and current relays in starting the compressor.
Provides guidance on checking and replacing capacitors for proper operation.
Addresses issues where the ice maker is not operating due to lack of power.
Troubleshoots lack of power or "off" indicator lights on the circuit board.
Addresses issues where the compressor runs but the indicator lights are on.
Addresses issues where the cuber stays in the freeze cycle, possibly due to sensor issues.
Addresses issues where the cuber stays in the harvest cycle, possibly due to switch or sensor faults.
Details preparation steps before cleaning the ice maker, such as removing ice.
Outlines the steps for sanitizing the ice maker after the cleaning process.
To Next Page
General