EasyManuals Logo

Cornelius Xtreme ICE XAC 830 User Manual

Cornelius Xtreme ICE XAC 830
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Owner / Operator Manual
IMI Cornelius Inc.
Release Date: October 28, 2005
Revision Date: December 22, 2005
Publication Number: 630460146OPR
Revision: A
www.cornelius.com
IMPORTANT:
TO THE INSTALLER.
It is the responsibility of
the Installer to ensure that
the water supply to the
dispensing equipment is
provided with protection
against backflow by an air
gap as defined in
ANSI/ASME A112.1.2-1979;
or an approved vacuum
breaker or other such
method as proved effective
by test.
Water pipe connections
and fixtures directly
connected to a potable
water supply shall be
sized, installed, and
maintained according to
Federal, State, and Local
Codes.
THIS DOCUMENT CONTAINS IMPORTANT INFORMATION
This Manual must be read and understood before installing or
operating this equipment

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cornelius Xtreme ICE XAC 830 and is the answer not in the manual?

Cornelius Xtreme ICE XAC 830 Specifications

General IconGeneral
ModelXAC 830
Ice TypeCube
Drain Connection3/4" FPT
RefrigerantR404A
Ice Maker TypeModular
Production Capacity830 lbs per day
Power Supply208-230V, 60Hz, 1Ph
Storage CapacityNo built-in storage

Related product manuals