Cornwell Tools CTG2000 User Manual

CTG2000 / CTG3000 / CTG5000 5 09/20/19
CTG2000 / CTG3000 / CTG5000
1/4", 3/8", & 1/2" Digital Torque Wrench
SETTING TORQUE VALUES
RESETTING PRESET VALUES
Use the Up arrow to increase torque value. Use the Down arrow to decrease torque value.
Note: The displays for CTG3000 3/8" Dr. and CTG5000 1/2" Dr. models show one less decimal place in the display.
To change a preset value stored in memory:
1. Press the memory button repeatedly to
access the preset value to be changed. (e.g. M5)
2. Press the button to change the units of
measure if required.
3. Use the UP/DOWN arrow buttons to
change the torque value.
Do one of the following:
A. Press the button to store the new value. The
torque wrench will stay at the new memory
location and will be ready for immediate use.
B. Press the button to go to the next memory
location in sequence. This is useful if you
are wanting to change/store multiple values.
Torque Wrench comes with 9 Preset values
pre-installed at the factory.
If this warning appears, the wrench has applied more
than 110% of the torque set in memory.
Increases
Torque Value
Torque Value
Decreases
Torque Value
Pre-Set Memory Indicator: M1
Pre-Set Memory Indicator: M2
Pre-Set Memory Indicator: M3
Pre-Set Memory Indicator: M9
Press or for immediate use.
- M4,
- M5 . . . etc.
Press

Cornwell Tools CTG2000 Specifications

General

Brand	Cornwell Tools
Model	CTG2000
Category	Power Tool
Language	English