SPECIFICATIONS
Rated Heat Input(Liquid Propane Natural Gas)
Propane Regulator Pressure
Natural Gas inlet Pressure
Clearance to combustible surfaces
40,000BTU/hr
11 inches water column
7 inches water column
Sides:24in.Top:72in.
Pilot box
Fire glass
2. Put the Fire Glass (not included) around the
burner, then remove the label
from the pilot box (see Figure 3).
A gas fire pit requires 15 lbs fire glass.
WARNING: Keep children away
during assembly, as this item
contains fire glass, which are
small pieces and can be
swallowed by children.
Figure 3
1. Carefully unpack all parts from the box, compare parts with package content listed above, make sure all parts are
present before beginning assembly of product. If any part is missing or damaged, do not attempt to assemble the
product. Contact customer service for replacement parts.
Fire bowl
Burner cover
3. Put Burner Cover onto the
fire bowl (see Figure 4).
NOTE: When the fire pit is NOT in
use or after use, when The fire
pit has cooled COMPLETELY,
cover it with the Burner Cover.
DO NOT PUT THE BURNER COVER
ON A HOT FIRE PIT.
Figure 4
4
To Next Page
Loading...