14
Memory function
The Memory function can be used to save a setting which is frequently used.
1. Set oven function,temperature and If necessary the clock functions Clock time and/or End time .
2. Press and hold the button for approx. 2 seconds, untial an acoustic signal sounds. The setting is saved.
To save another setting, press the button for approx. 2 seconds. The previously saved setting is replaced by the
new one.
Starting the Memory function
1. Switch the oven on using the button On/Off .
2. Using the butt
on call up the saved setting.
Clock Functions
Countdown
To set a countdown. A signal sounds after the time has elapsed.
This function does not affect the operation of the oven.
Cook time
To set how long the oven is to be in use.
End time
To set when the oven is to switch off again.
Time
To set, change or check the time(See also section“Before Using for the First Time”)
General instructions
· After a clock function has been selected, the corresponding symbol flashes for approx. 5 seconds.During this time,the
desired times can be set or modified using the or button.
· When the desired times has been set,the symbol continues to flash for approx. 5 seconds. After this the symbol lights
up.The set Countdown begins to count down.
· The time set for Cook time and End time begins to count down after the selected function starts.
Countdown
1. Press the Clock Functions button repeatedly until the symbol for Countdown flashes.
2. Set the desired Countdown time using the or button(max.99.00minutes).
After approx. 5 seconds the display shows the time remaining.
The symbol for Countdown lights up.
When the time set has elapsed, an audible signal sounds for 2 minutes.“0.00”lights up and the symbol for Countdown
flashes.
To turn off the audible signal:
Press any button.
Cook time
1. Select oven function and using or button select temperature.
2. press the Clock Functions button repeatedly until the symbol for Clock time flashes.
3. using the or button set the desired cooking time.
The oven switches itself on.The symbol for Cook time lights up.
By repeatedly pressing the Clock Funtions button,the current time can be called up.
When the time has elapsed, an audible signal sounds for 2 minutes.
The oven switches itself off.
“0.00”is displayed and the symbol for Cook time flashes.
To turn off the audible signal:
If your cooking process requires it. Please preheat your oven first before following the steps below.
To Next Page
Loading...
Need help?
General
