Replacing the oven lamp
Electrical Shock Hazard
Failure to follow these instructions can result in death, fire, or electrical shock.
1. Disconnect the oven from the power
supply by means of the omni-polar
switch used to connect the appliance to
the electrical mains, or unplug the
appliance if the plug is accessible.
2. Remove the glass cover of the lamp-
holder, turning counter-clockwise. (See
Figure 11)
3. Remove the lamp and replace with a
lamp resistant to high temperatures
572°F (300℃) with the following
characteristics:
Voltage: 208-240V
Wattage: 25W
Type: E 14
4. Replace the glass cover and
reconnect the oven to the mains power
supply.
26
To Next Page
