32
Cleaning
IMPORTANT:
• Clean the range hood and grease filter frequently according to the
following instructions. Replace grease filter before operating range hood.
• Be sure the power is off/disconnected and the lights are cool before
cleaning the range hood.
Exterior Surfaces
Clean the range hood with a mild detergent and soft cloth. To avoid damage
to the exterior surface, do not use abrasive cleansers or steel-wool pads
Metal Grease Filter
The metal filter should be washed frequently. Place metal filter in dishwasher
or hot detergent solution to clean. Let metal filter dry thoroughly before
replacing it.
1. Turn off fan and lights. Check that the LED lights are cool.
2. Remove the metal filter by pushing the release knob and then pulling
down the metal filter.
3. Wash the metal filter as needed in the dishwasher or hot detergent
solution.
4. Reinstall the metal filter by pushing the release knob, pushing up the
metal filter back into the range hood, and releasing the knob to latch into
place.
RANGE HOOD CARE
Setting the Clock
1. Press and hold the Timer button (B) for 3 seconds.
2. Press or hold the Blower Speed Increase button (D) to set hours, and the
Blower Speed Decrease button (C) to set minutes.
3. Press the Timer button (B) to confirm. Wait for 5 seconds for the changes
to be saved.
To Next Page
Loading...
Need help?
General
