INSTALLING THE LEGS
The ranges must only be used with the
legs properly installed.
Four height-adjustable legs are shipped
with the range in the polysty
rene container
situated over the appliance.
Before installing the legs, position the
appliance near its final location as the legs
are not suitable for moving the appliance
over long distances.
After unpacking the range, raise it enough
to insert the legs in the appropriate
receptacles situated on the lower part of the
appliance. Lower the range gently to keep
any undue strain from legs and mounting
hardware. If possible use a pallet or lift jack
instead of tilting the unit.
Adjust leg height to the desired level by
twisting the inside portion of the leg
assembly until the proper height is reached.
Check with a level that the cooktop is
perfectly lev
el.
To Next Page
Loading...
Need help?
General
