20
INSTALL COOKTOP
Countertop
Cooktop
base
1. Determine whether your cabinet construction provides clearance for
installing hold-down brackets at cooktop base ends.
2. Using two or more people, place cooktop right side up into the cutout.
Note: Make sure that the front edge of the cooktop is parallel to the front
edge of the counter top. If repositioning is needed, lift entire cooktop up
from cutout to avoid scratching the countertop.
3. Attach hold-down brackets to cooktop base bottom with the screws
supplied. Securely tighten screws.
To Next Page
Loading...
Need help?
General
