BURNER BASE
Cleaning Recommendation:
• Remove the burner cap from the base. Clean the burner cap with hot soapy
water, and then rinse it.
• Remove the burner base and clean the gas tube opening under the base.
• Clean clogged burner ports with a straight pin, needle, or small-gauge wire
as shown. Do not use a wooden toothpick or clean in the dishwasher.
• Gently clean the igniter with a damp cloth.
STAINLESS STEEL COOKTOP SURFACE
• Food spills containing acids, such as vinegar and tomato, should be
cleaned as soon the cooktop is cool. These spills may affect the finish.
• Do not use scouring pads, abrasive cleaners, cooktop cleaner, steel wool
pads, gritty washcloths, or abrasive paper towels.
Cleaning Recommendation:
• For best results, use a soft cloth or non-scratch sponge.
• Rub in direction of the grain to avoid damaging the surface.
• Use stainless steel or all-purpose cleaner.
PORCELAIN ENAMEL COOKTOP SURFACE (ON SOME MODELS)
Cleaning Recommendation:
• Use a nonabrasive scrubbing pad and glass cleanser or a mild liquid
cleaner.
38
• The holes in the burner bases must be kept clean for proper ignition and a
complete, even flame. Spillovers should be cleaned immediately since they
can clog the openings in the burners.
IMPORTANT: Before cleaning, make sure all controls are OFF and the
cooktop is cool.
To Next Page
Loading...
Need help?
General
