REPLACING LIGHT BULBS
from the cooking process. To ensure optimal performance,
appearance, and a sanitary cooking environment, clean the
clean cloth and mild detergent solution on stainless steel and
painted surfaces. Do not use corrosive or abrasive cleaning
agents or steel wool or scouring pads as these will scratch
the surface. Do not use cleaning products that use chlorine
bleach or orange cleaners.
and the blower should be cleaned frequently. When washing
by hand use warm soapy (mild detergent) water. The grease
CLEANING & MAINTENANCE
CAUTION: the light bulbs and glass cover become extremely
hot when running. Shut off the lights and allow them to cool
prior to changing the bulb. Failing to do so could result in
serious burns. Turn off power to the unit before replacing bulb.
Be careful around sharp edges.
Fig.1
2. Reach within the unit and push out the lamp housing to-
wards you. See Fig. 1 on previous page.
plate. See Fig. 2 above.
4. Remove the burnt out 2-pronged 20 watt Halogen bulb.
Replace with a new 20 watt Halogen bulb. Wipe the new bulb
with a clean cloth before replacing the cover.
5. Caution: the lights are designed for 20 watt Halogen bulbs
only. Replacing with high wattage bulbs can result in
6. Replace lamp cover and press lamp housing back into
place.
Fig. 2
6
To Next Page
Loading...
Need help?
General
