To Next PageTo Next Page
Need help?Do you have a question about the Costco 2127014 and is the answer not in the manual?
Covers code compliance, flame resistance, and advice for high winds/snow.
Guidelines for safe assembly with assistance, clear areas, correct tools, and checking for loose parts.
Instructions for checking all parts before commencing assembly to ensure completeness and prevent issues.
Securing the base plate to the post using bolts as per Fig 1.
Sliding the post cover into the top of the post as shown in Fig 2.
Fastening the top cover to the post with bolts as illustrated in Fig 3.
Joining right and left long lintels with connector and bolts, adding lintel cover.
Connecting the long netting tube to the lintels using bolts as shown.
Assembling right and left short lintels with connector and cover using bolts.
Securing the short netting tube to the short lintels with bolts.
Attaching the left and right long lintels to the top cover using bolts.
Connecting the left support bar to the left long lintel and post with bolts.
Connecting the right support bar to the right long lintel and post with bolts.
Fastening the lintels (C1/C2) to the top cover (B) with bolts.
Connecting the left support bar to the left short lintel and post.
Connecting the right support bar to the right short lintel and post.
Fastening the corner piece to the post using bolts.
Attaching the cover piece to the top cover using bolts.
Securing the corner cover to the lintels with bolts.
Inserting and securing the top connecting tube into the top frame using bolts.
Attaching support plates to the connecting tube and top frame.
Securing the bracing tube to the connecting tube and top connecting tube.
Screwing the hook onto the connecting tube.
Fastening long top bars to the top frame and corner pieces with bolts.
Securing short top bars to the top frame, connecting tube, and lintels with bolts.
Connecting small top bars using connectors and securing them to the long top bars and lintels.
Attaching left, middle, and right supporting tubes to respective top bars and short bars.
Securing edge bands to the small short bars using bolts.
Fixing top boards onto supporting tubes with bolts; do not tighten fully yet.
Placing the big top cover over the top and connecting it to the connecting tube.
Fixing the remaining top boards onto supporting tubes; do not tighten fully yet.
Covering the junction of a short top board and the top frame with a protective edge.
Covering the big top frame with covers and tightening them with bolts.
Hanging the mosquito netting onto the hooks of the netting tubes.
Drilling holes and inserting expansion bolts to anchor the gazebo base plates to the floor.
Guidelines for cleaning the gazebo and protecting its finish from damage and oxidation.
General| Brand | Costco |
|---|---|
| Model | 2127014 |
| Category | Outdoor Furnishing |
| Language | English |
