To Next PageTo Next Page
Need help?Do you have a question about the Costco Vitis and is the answer not in the manual?
General| Brand | Costco |
|---|---|
| Model | Vitis |
| Category | Outdoor Furnishing |
| Language | English |
Guidelines for safe assembly, including recommendations for adult assistance and keeping the area clear.
Instructions for regular inspection to ensure structural integrity and tighten any loose components.
Steps before assembly, including parts check, comparison with lists, and identifying required tools not included.
Slide base cover over posts, then attach base plates using specified bolts.
Connect middle lintels with connectors and shields using bolts, leaving them untightened initially.
Connect lower lintels with connectors and shields using bolts, leaving them untightened initially.
Attach lower lintels to posts with bolts, cover with plastic plugs, and stand the structure upright.
Attach middle lintels to posts using bolts and cover with plastic plugs.
Attach diagonal braces to posts and lintels using bolts and cover with plastic plugs.
Connect upper lintels with connectors and shields using bolts.
Attach the assembled upper lintels to the middle lintels using specified bolts.
Connect top cross braces using connectors and shields, then tighten with bolts.
Attach the assembled top cross braces to the upper lintels using specified bolts.
Fix the base plates securely onto the ground using stakes.
Use mild detergent, rinse with water, and air dry; avoid harsh chemicals or abrasives.
Note that surface oxidation may occur on scratched steel; handle with care to prevent paint damage.
