To Next PageTo Next Page
Need help?Do you have a question about the Costway FP10023US-DK and is the answer not in the manual?
Explains the safety alert symbol, DANGER, and WARNING meanings for user safety.
Crucial safety guidelines for operating electrical appliances, cord handling, and placement.
Instructions for unpacking, checking accessories, and initial cleaning of the appliance.
Step-by-step guide for filling the water reservoir and preparing the ice maker for operation.
Overview of the control panel, indicator lights, and buttons for ice making functions.
Detailed steps for running the cleaning cycle to maintain hygiene and performance.
Instructions on how to initiate the ice-making process and monitor ice production.
Information on the 'Ice Full' indicator and procedures for opening and removing the ice drawer.
This document describes the Costway Portable Ice Maker, model FP10023US-DK, providing a comprehensive guide for its operation and maintenance. The ice maker is designed for home use, offering a convenient way to produce ice cubes.
The Costway Portable Ice Maker is a standalone appliance that produces ice cubes from potable water. It features a control panel with indicator lights for "Add Water," "Power," and "Ice Full," as well as buttons for "ICE," "CLEAN," and "LIGHT." The "Add Water" indicator illuminates when the water reservoir needs refilling, while the "Ice Full" indicator signals that the ice drawer is at capacity, prompting the unit to stop ice production automatically. The "Power" indicator shows when the unit is connected to power.
The "ICE" button initiates or stops the ice-making process. When pressed, the "ICE" icon lights up and then flashes after a few seconds, indicating that ice production has begun. The "CLEAN" button is used to activate a cleaning cycle, which is highly recommended before first use or after a long period of inactivity. When pressed, the "CLEAN" icon lights up and then flashes, signifying that the cleaning procedure is running for approximately 20 minutes. The "LIGHT" button controls an internal light within the appliance, allowing users to illuminate the interior.
The ice maker includes a water reservoir located on top of the unit, which can hold up to 0.97 gallons (3.7 liters) of potable water. Water is poured into this reservoir, which then feeds the ice-making mechanism. An observation window allows users to monitor the amount of ice stored in the drawer without opening it. The unit also features a drawer for collecting and storing the produced ice cubes.
For drainage, the appliance is equipped with a water drain cap and a drainpipe at the back. This system is crucial for emptying the internal water tank and for draining dirty water after cleaning cycles. The hot air outlet ensures proper ventilation, which is essential for the unit's efficient operation.
Before initial use, users are instructed to remove all packaging and tapes, clean the interior with lukewarm water and a soft cloth, and then rinse it. The ice maker should be placed on a flat, stable surface, away from direct sunlight and heat sources, ensuring at least 6 inches of clearance around the back and sides for proper ventilation. It is also recommended to allow the refrigerant fluid to settle for one hour before plugging in the unit.
To start ice production, the water reservoir is removed, filled with potable water, and then placed back on top of the appliance. It's important to ensure the water tank under the drawer is empty before replacing the drawer. The drip tray should also be positioned correctly.
The unit operates by plugging it into a properly grounded 115 Volt, 60 Hz electrical outlet. The power cord must be accessible, and the use of an extension cord is generally discouraged unless it meets specific safety requirements (No.14AWG minimum size, rated no less than 1875 watts).
The "CLEAN" function is a key usage feature for maintaining hygiene. Before running a cleaning cycle, users must ensure the water drain cap is inserted into the drainpipe. After the cleaning cycle, the appliance should be moved to the edge of a desktop, and the drain plug removed to allow the dirty water to drain into a container.
For ice production, after ensuring the drainpipe is properly connected, the "ICE" button is pressed. The unit will automatically stop making ice when the ice drawer is full, indicated by the "Ice Full" light. If the "Add Water" indicator illuminates, it means the water pump cannot draw water, and the reservoir needs refilling.
The ice drawer can be opened by gently pulling its handle horizontally until it rests at an angle. To remove the drawer completely, it should be pulled out horizontally, then gently lifted at an angle and pulled free. Reloading the drawer involves tilting it at the same angle, inserting the back into the front panel, flattening it, and then pushing it into full closure.
Regular cleaning is crucial for the ice maker's performance and hygiene. Before any cleaning or maintenance, the unit must be unplugged. The drawer and water reservoir should be removed. The interior can be cleaned with diluted detergent, warm water, and a soft cloth, followed by rinsing with clean water. The dirty water is then drained by unplugging the drain cap at the back. The exterior of the ice maker should be cleaned regularly with a mild detergent solution and warm water, and both the interior and exterior dried with a soft cloth.
It is recommended to change the water in the reservoir every 24 hours to maintain a reasonable hygiene level. If the unit is not going to be used for an extended period, all water should be drained from the reservoir, and the unit dried completely.
Troubleshooting guidance is provided for common issues such as the "Add Water" indicator lighting up (lack of water), the "Ice Full" indicator lighting up (too much ice or no ice cubes inside), and the "Light and ICE icon flashing" (refrigerant liquid leakage, broken cover motor, or blocked cooling system pipe). Solutions range from refilling water and removing ice to restarting the unit or contacting a qualified technician for more complex problems. Issues like slow ice making due to high ambient or water temperature, or blocked hot air outlets, are also addressed with practical solutions. Water leakage problems are typically resolved by ensuring the drain plug is in place or by verifying pipe joint integrity and seal condition.
Finally, the manual emphasizes proper disposal of the unit in accordance with national regulations when it is no longer in use, highlighting environmental responsibility.
General| Brand | Costway |
|---|---|
| Model | FP10023US-DK |
| Product Type | Ice Maker |
| Ice Production Capacity | 26 lbs per day |
| Ice Storage Capacity | 1.5 lbs |
| Ice Shape | Bullet |
| Power Consumption | 120W |
| Voltage | 115 V/60 Hz |
| Water Reservoir Capacity | 2.2 L |
| Cycle Time | 6-8 minutes |
| Ice Size | Small |
