What to do if there is water leakage from my Costway ES10127US?
If there is water leakage from your Costway Ice Maker, make sure the bottle is installed correctly. Also, ensure the drain plugs are in place and fit well, and check that all pipes are connected properly. The water pipe may also need replacement.
What to do if the “Ice Block” indicator light is on in my Costway ES10127US?
If the "Ice Block" indicator light is on, it could mean that the ice tank is full. In this case, remove some ice cubes. Alternatively, the ice full sensor may be faulty. To address this, press the “Ice Block” button for more than 5 seconds to initiate 20 mandatory ice-making cycles.
Why is my Costway Ice Maker not dispensing water?
If the dispenser isn't dispensing water, first check if the bottle and the top water tank are empty, and replace the bottle if needed. Also, make sure to press "Unlock" before pressing the Hot Water button.
How to fix the “Add Water” indicator light on my Costway Ice Maker?
If you see the “Add Water” indicator light on, try the following: * Replace the water bottle. * Pour drinking water into the top reservoir up to the MAX level. * Clean the water tank and check if the water level switch is working correctly.
Why are the ice cubes too thin in my Costway ES10127US Ice Maker?
If the ice cubes are too thin, move the Costway Ice Maker to a cooler location. Also, ensure there's free airflow on all sides of the unit, maintaining at least 10 to 15 cm (4 to 6 inches) of space away from walls or other obstacles.
What does it mean when the “Hot Water” indicator light flashes quickly on my Costway Ice Maker?
If the “Hot Water” indicator light flashes quickly, the hot water sensor may be faulty. Replace it with a new temperature sensor.
Why are the ice cubes too thick in my Costway ES10127US Ice Maker?
If the ice cubes are too thick, move the Costway Ice Maker to a warmer location.
What to do if the “Unlock” indicator light flashes quickly on my Costway ES10127US?
If the “Unlock” indicator light flashes quickly on your Costway Ice Maker, the ambient temperature sensor might be faulty. Replace it with a new temperature sensor.
Why is the Ice Water indicator light flashing quickly on my Costway Ice Maker?
If the Ice Water indicator light flashes quickly, the cold water sensor is likely faulty. Replace it with a new temperature sensor.
Diagram showing numbered components of the ice maker, including the drip tray and cover.
Diagrams illustrating the ice maker's control panel, buttons, and indicator lights.
Guidance on selecting a suitable place for the ice maker, considering ventilation and surface.
Instructions for attaching the drip tray and grid to the ice maker.
Steps to power on and off the cooling, heating, and ice making systems.
Instructions on how to dispense cold water from the unit.
Procedure for dispensing ice cubes from the ice maker.
Guidance on dispensing hot water, including safety precautions.
General guidelines for cleaning the ice maker, including safety cautions.
Steps for cleaning the water reservoir, including draining and drying.
Instructions for cleaning internal parts of the ice maker.
To Next Page
General
