Why is my Costway EP24525US working but not making ice?
Your Costway Ice Maker might not be producing ice due to several reasons. The ambient or water temperature could be too high; try moving the unit to a location where the ambient temperature is below 86°F (30°C) and use cool water. Alternatively, there may be a refrigerant system leakage or blockage, which would require a qualified technician to service.
What to do if my Costway Ice Maker is making thin ice cubes?
If your Costway Ice Maker is producing thin ice cubes, it could be due to a few factors. The ambient temperature might be too high, so try moving the unit to a cooler location. Also, ensure the water temperature is no more than 77°F (25°C). You can also press the button to increase the ice-making time.
What to do if my Costway Ice Maker makes ice cubes too thick to drop?
If your Costway Ice Maker is producing ice cubes that are too thick and cannot drop down, it may be because the ice-making cycle is too long. Try pressing the button to reduce the ice-making time.
What to do if there is no water in the water separator pipe of my Costway EP24525US Ice Maker?
If there's no water in the water separator pipe of your Costway Ice Maker, it could be due to a couple of reasons. The holes might be blocked; use a slim wire to carefully prick each hole until water can flow out easily. Alternatively, the water filter might be blocked, so try cleaning it.
What to do if < > is on my Costway EP24525US Ice Maker?
If the < > light is on, on your Costway Ice Maker, it indicates either a lack of water or too many ice cubes in the basket. Remove the ice cubes from the basket.
What to do if is on my Costway Ice Maker?
If the light is on your Costway Ice Maker, it indicates an ambient temperature sensor breakdown. The unit can still work, but you should change the sensor.
What to do if is on my Costway EP24525US?
If the light is on your Costway Ice Maker, it indicates a refrigerating tube sensor breakdown. The unit can still work, but you should replace the sensor.
What to do if the water reservoir has water, but < > is on my Costway EP24525US Ice Maker?
If the water reservoir in your Costway Ice Maker has water, but the < > light is still on, it suggests that the inlet solenoid valve is broken down. You need a technical service person to maintain it.
Essential safety advice for operation, power cord, and extension cord usage.
Identifies the external parts and control panel elements of the ice maker.
Steps for removing packaging, checking contents, and initial cleaning.
Guidance on connecting the ice maker to a power source.
Detailed steps for cleaning the ice maker before first use.
Explanation of the ice maker's control panel and display symbols.
How to set the timer for ice thickness and drain the unit.
Specifications and technical data for the ice maker.
Electrical schematic showing the internal components and connections.
To Next Page
General
