1. Important Safety Instructions
1-1. General Safety Precautions
1-1-1. Do not expose the Inverter to rain, snow, spray, bilge or dust.
To reduce risk of hazard, do not cover or obstruct the ventilation
openings. Do not install the Inverter in a zero-clearance
compartment. Overheating may result.
1-1-2. To avoid a risk of fire and electronic shock. Make sure that
existing wiring is in good electrical condition; and that wire size
is not undersized. Do not operate the inverter with damaged or
substandard Wiring.
1-1-3. This equipment contains components which can produce arcs
or sparks. To prevent fire or explosion do not install in
compartments containing batteries or Flammable materials or in
locations which require ignition protected equipment. This
includes any space containing gasoline-powered machinery,
fuel tanks, or joints, fittings, or other connection between
components of the fuel system.
1-2. Precautions When Working with Batteries
1-2-1. If battery acid contacts skin or clothing, wash immediately with
soap and water. If acid enters eye, immediately flood eye with
running cold water for at least 20 minutes and get medical
attention immediately.
To Next Page
Loading...
