Contact information
Cotes A/S
Mariane Thomsens Gade 2f, 11.
8000 Aarhus C, Denmark
+45 5819 6322
info@cotes.com
WWW.COTES.COM
Warranty conditions
The Cotes factory warranty is only valid if a
documented programme of service and preventive
maintenance has been carried out.
Maintenance must be carried out according to the
instructions in the SERVICE AND MAINTENANCE
section. Documentation for this must be in the form
of a written log/journal, with attested entries.
All spare parts must have been purchased from Cotes
or an authorized Cotes Partner.
Copyright
All copyright to this publication belongs to Cotes A/S.
All rights reserved. You are not allowed to photocopy,
reproduce, adapt, modify, translate, display or
transfer any part of this publication to any other
media, without explicit prior written permission from
Cotes A/S.
Compliance with directives and standards
− Machinery Directive 2006/42/EC
− Eco-design 327/2011 directive 2009/125/EF as
regards the eco-design fans driven by motors
with input power between and 125W to 500kW
− EMC Directive 2014/30/EU
− RoHS 2011/65/EC
− EN60204
− EN60335
Technical information
+45 5819 6366
tech-support@cotes.com
Service and maintenance support
+45 5819 6366
tech-support@cotes.com
Terms
The information contained in this publication and
the products and equipment described herein are
subject to change at any time without prior notice.
Cotes A/S has no obligation to inform buyers of the
products and equipment of such subsequent
changes.
This publication may contain misprints. Cotes A/S is
not liable for errors or omissions in this publication
or for incidental or consequential damages in
connection with the furnishing of or the use of this
publication.
Cotes A/S is not liable for any loss or damages,
including consequential damages caused by
disregard of any advice or warnings in relation to
safety in this publication.
This publication cannot be deemed to contain any
express or implied warranties of any kind concerning
the construction or the suitability of the products
described or the fitness of the products for any
particular purpose.
This publication is subject to the provisions and
requirements laid down in Danish law.
To Next Page
Loading...
