CLEANING METHOD
1. Clean the main body(every 2 ~ 4 weeks)
Wipe the main body with a dry and soft cloth.
- If the grime is stubborn, wipe it away with a wet cloth.
2. Clean the drip tray
1
Detach the drip tray and grille
Gently lift up the drip tray. Then clean
the drip tray and grille under running
water with soft cloth or brush. Dry
them in shade.
2
Attach the drip tray and grille
Place the drip tray in place. Then,
place the drip tray grille on top of the
drip tray.
Replace the lters regularly. If not, the product’s water quality may be degraded.
The lter replacement cycle may vary within the range of expected cycle depending on the feed
water quality.
Part No. Filter name Expected Replacement Cycle
WJNTF6-PAC-M NANOTRAP (PAC) FILTER 238 gallons or 6 month
WJIF6-LR-M INNO-SENSE FILTER 238 gallons or 6 month
1
2
Do not clean the outside of the product by spraying water directly onto it or
using benzene or thinner.
Tips
- When the lter replacement cycle has reached its end, the lter replacement
indicator lights up to notify that the lter must be replaced.
Tips
FILTER REPLACEMENT
Filter replacement cycle
To Next Page
Loading...
Need help?
General
