FILTER DESCALING
1. Close the feed water supply valve. Then slide the top cover to reduce it. Push and hold the button
on the upper lter case. Take out the lters and lter case inside.
2. Turn the Inno-sense lter clockwise to detach it from the lter case.
Open the DE-SCALE KIT in clockwise and insert the descaler.
3. Close the DE-SCALE KIT counterclockwise, place it in lter case rst, then the lter case in the
product.
4. Open the feed water supply valve. Dispense 120 cc of ambient water, then 1.5 L of hot water in
continuous dispensing for 3 minutes. After hot water dispensing, tap the hot water lock button for
1 second.
- Refer to the p. 7 to dispense the hot water in continuous
dispensing.
To Next Page
Loading...
