⑥ ROI (Region Of Interest): Display ROI in the image set by CAMERA CONTROLLER (one of PC S/W).
OFF: Does not display ROI in the image.
EMPTY RECTANGLE: Show ROI in the type of empty rectangle.
FILLED RECTANGLE: Show ROI in the type of filled rectangle.
ROI (Rectangle or Spot) will not be displayed on video output OF CVBS or HDMI if the camera is connected
to the S / W (Thermal Imaging Analyzer, Camera Controller, etc.).
The exception is that the alarmed ROI is displayed on the video output OF CVBS or HDMI.
<Before connection to S/W>
To Next Page
Loading...