COX CG320 - Default Image Adjustments and NUC Settings

We see temperature and temperature differences!!!
19
CG320 & CG640 Manual
<After connection to S/W>
⑦ CORRECTION INFO. : Display parameters which affect temperature measurement. Those parameters must
be set for accuracy in measurement.
 ON: On the bottom left, EMISSIVITY, TRANSMISSION (transmission rate of atmosphere),
ATMOSPHERE (AMBIENT TEMPERATRUE) are displayed.
 OFF: Does not display those parameters.
⑧ TRANSPARENCY: set transparency of OSD menu window.
 OFF, 20%, 40%, 60%, 80% are available
<OFF> <20%>