① LINK: Display if camera is connected to the network or not
It is “ON” when camera is connected to the network and “OFF” when not connected
② LINK SPEED: Show network atmosphere when camera is connected to the network
0MB DUPLEX NONE : When camera is not connected to the network
100MB DUPLEX FULL : When camera is connected to the 100MB network
1GB DUPLEX FULL : When camera is connected to the 1GB network
③ DHCP: Set if DHCP is used or not.
ON: IP address is automatically assigned.
OFF: Manage IP address manually.
To Next Page
Loading...
