COX CG640 - 6.8 ALARM-OUTPUT Tab; A01;A02 TYPE: Set Alarm Signal Type

We see temperature and temperature differences!!!
33
CG320 & CG640 Manual
6.8 ALARM-OUTPUT Tab
Set various parameters of alarm signal camera outputs.
① A01 (02) TYPE: Set type of alarm signal, Normal Open or Normal Close.
 If NO is selected: When there is no alarm, output is “0”.
When there is alarm, output is “1”
 If NC is selected: When there is no alarm, output is “1”.
When there is alarm, output is “0”.