NOTE:
Priro to the Bluetooth connection, the Bluetooth indicator (blue) on the handpiece is flashing. When
paired, the indicator is on.
The Bluetooth connection will be saved automatically.
Bluetooth pairing is only required after replacing control unit or handpiece.
3. Disconnecting
Press to enter setup state and then press to prepare to disconnect;
Follow the prompt step by step.
Operation
The instrument integrates three modes namely.
Endo motor mode: root canal preparation.
Apex locator mode: root canal length measurement.
Multi-function mode: undertake root canal measurement and preparation.
1. Endo Motor Mode
If not any test wire connected to the instrument, it automatically enters Endo Motor Mode.
1. Connection Accessories
Connect contra-angle
Align and connect the locating slot and the locating pin.
Disconnecting: Pull it straight out.
To Next Page
Loading...
