What to do if my Coxo CX235 Dental equipment handpiece fails to rotate?
If your Coxo Dental equipment handpiece isn't rotating, it's likely due to the contra angle chucking with bur, the latch plate failing to fix in the proper position, or dirt getting into the handpiece. To resolve this, clean and lubricate the handpiece, and try moving it by hand.
Why does the body of my Coxo CX235 Dental equipment's straight head rotate during motor running?
If the body of the straight head or contra angle of your Coxo Dental equipment rotates during motor operation, it's likely that the O-ring on the motor nose is worn. The suggested solution is to replace the O-ring.
Why Coxo Dental equipment handpiece fail to spray water?
If your Coxo dental handpiece isn't spraying water, the spray hole might be blocked. Try cleaning it carefully with a probe.
What to do if Coxo Dental equipment handpiece has water leakage?
If your Coxo dental equipment handpiece is leaking water, the O-ring and washer may be aged. Replace the aged parts and tighten the screw bolt of the connecting hose.
How to fix the body of straight head and contra angle that rotates during motor running in Coxo Dental equipment?
If the body of the straight head and contra angle rotates during motor running in your Coxo dental equipment, the O-ring on the motor nose could be worn. Replacing the O-ring should solve this issue.
Key operational parameters like temperature, humidity, and noise.
Specifies operating temperature limits and acceptable humidity levels.
Indicates the maximum sound pressure level the equipment produces.
Highlights specialized use for stomatology and restriction to doctors.
Emphasizes pre-use checks, secure connections, and avoiding running without a bur.
Details required air pressure and recommended sterilization methods.
Illustration of the basic CX235-1B contra angle.
Illustration of the CX235-1C optic fiber contra angle.
Illustration of the CX235-1E LED contra angle with generator.
Step-by-step guide for mounting burs using the locking pin chuck.
Instructions for bur insertion and removal using the push button mechanism.
Steps for mounting burs using the locking pin on 4:1 reduction models.
Instructions for bur insertion using the push button on 4:1 reduction models.
Steps for attaching the rubber cup or brush to the handpiece head.
Steps for detaching the rubber cup or brush from the handpiece.
Steps for mounting burs with the locking pin on 16:1 reduction models.
Instructions for bur insertion using the push button on 16:1 reduction models.
Steps for mounting burs using the locking pin on 20:1 reduction models.
Instructions for bur insertion using the push button on 20:1 reduction models.
Guide for connecting irrigation tubes to external spray nozzles.
Guide for connecting irrigation tubes to internal spray nozzles.
Instructions for connecting irrigation tubes for both external and internal spray.
Guide for dual irrigation setup for push button handpieces.
Steps for lubricating the handpiece after daily use.
Guidelines for lubrication during heavy work periods.
Steps for scrubbing and drying the handpiece head, including brush cleaning.
Instructions for cleaning the cellular optical bulb entry point.
Advice on holding the handpiece firmly to prevent slippage during lubrication.
Specifies the recommended duration for supplying lubricant.
Recommends steam autoclaving as the primary sterilization method.
Outlines the steps for scrubbing, lubricating, and packaging for autoclaving.
Addresses problems with the straight head or contra angle rotating during motor running.
Solutions for when the handpiece fails to rotate due to bur chucking or dirt.
Specifies the 12-month guarantee and common reasons for voiding it.
Defines important symbols found on the instrument's label.
Outlines environmental conditions for safe transport and storage.
General| Brand | Coxo |
|---|---|
| Model | CX235 |
| Category | Dental equipment |
| Language | English |
To Next Page
