Coxo CX235 - Mounting of Bur; Locking Pin Bur Mounting; Push Button Bur Mounting

Insert bur
Switch out the rightside
1.Locking pin
Open the latch chuck,insert the bur,be sure the quadrate part of the bur
aline the proper part in the cartridge then turn the latch chuck back.
When remove the bur,open the latch chuck then take out the bur.
2.Push button
The fixed method of internal contra low speed handpiece is push button,
push the button to the end and then the bur can be get out of head.
press
Mounting of bur
Fig.3.3
Fig.3.4
Insert bur
NOTE:
1、Do not use a bending , cracking, deformation and unqualify bur. If using it,
may cause a it broken,or a flying off leading injured accident during operation
process.
2、make sure the bur lock tightly before operating.
1:1 direct drive
1 0