30
4.3. Network Settings
4.3.1. IP
Network Type: User can set Dynamic Address to obtain IP directly from router, or set a Static IP manually.
Media Port: User can set the Media port to transfer video if need to view camera remotely. (Work with DDNS or
external IP)
Web Port: User can set the web port to transfer video if need to view camera remotely. (Work with DDNS or external
IP)
ONViF: User can set ONViF port to work with other ONViF device like NVR Etc;
RTSP Port: Default 554;
DNS server: User can change DNS IP settings.
4.3.2. Wireless Settings
Click the icon “Search” to scan the wireless network in this environment automatically.
Using Wireless LAN: Set WI-Fi ON/OFF.
SSID: the ID of Wireless network, it should be the same SSID as the connected Wi-Fi router.
Network Type: Two modes:
1. Infra (Infrastructure Mode), if using normal AP, choose Infra mode.
2. Ad-Hoc Mode. If using point-to-point transmission, choose Ad-Hoc mode.
The factory setting is Infra.
● Encryption: WEP, TKIP, AES optional.
● Authentication: WEP: Open System or Share Key. TKIP (AES): WPA-PSK or WPA2-PSK.
● Select Key: Choose the channel of WEP share Key.
● Key: Input the key the same as the settings in your router.
All the Wi-Fi encryption mode settings should be the same as your Wi-Fi router, and different encryption has different
authentication menu.
To Next Page
Loading...
