41
4.7.3. Auto Maintain
Auto Maintain provides an auto protection of hardware; Set a time such as 24:00; Then camera will auto reboot; and
refresh the hardware performance.
4.7.4. System
Reboot Device: Camera will get reboot.
Restore factory settings: User can restore factory settings once forget password, settings etc.
Upgrade Device Firmware: To upgrade or degrade the camera firmware. (The firmware needs to store in the same
camera you are viewing camera.)
Upgrade Device Web UI: To upgrade or degrade the camera web UI. (The firmware needs to store in the same camera
you are viewing camera.)
To Next Page
Loading...
