Cradlepoint IBR600C Series User Manual

3/27/24, 1:14 PM
IBR600C Series Router Quick Start Guide
https://customer.cradlepoint.com/s/article/COR-IBR600C-Series-Quick-Start-Guide
9/10
INDICATOR BEHAVIOR
Blinking Green = Modem is connecting.
Solid Yellow = Modem is not active.
Blinking Yellow = Data connection error. No modem connection possible.
Blinking Red = Modem is in the process of resetting.
Blinking Red with Signal Strength LEDs = SIM door is not installed, modem is off
SIGNAL STRENGTH: Blue LED bars indicate the active modem’s signal strength.
4 Solid Bars = Strongest Signal.
1 Blinking Bar = Weakest Signal.
OTHER Additional LED Indications:
Several LEDs blink when the factory reset button is detected.
Two modem LEDs blink red in unison for 10 seconds when there is an error during NCOS upgrade.
Troubleshooting
If the device takes longer than five minutes to connect to the Internet, log into the local UI of the device to make configuration changes or to start the
troubleshooting process. You must be physically co-located with the device to do this. Refer to No Internet or Connection Issues
(https://customer.cradlepoint.com/s/article/NCOS-No-Internet-or-Connection-Issues) for more information.
Once the device connects to the Internet, it should then connect to your NetCloud Manager account and start its configuration download.
Resources
IBR600C Series Router Webpage (https://cradlepoint.com/product/endpoints/ibr600c-series/)
IBR600C Series Router Data Sheet (https://cradlepoint.com/datasheet/ibr600c-series-router/)
Help and Support
Cradlepoint Connect Customer Community (https://customer.cradlepoint.com/s/)
Cradlepoint Support Services (https://cradlepoint.com/support/)
Contact Us (https://cradlepoint.com/about-us/contact-us/)

Cradlepoint IBR600C Series Specifications

General

Model	IBR600C Series
Category	Network Router
Connectivity	4G LTE
WiFi	802.11 b/g/n
Ethernet Ports	2
Power	12V DC
Operating Temperature	-30°C to 70°C
Security	VPN