Need help?Do you have a question about the CraftBot Flow and is the answer not in the manual?
General| Layer Resolution | 50 - 300 microns |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Connectivity | USB, Wi-Fi, Ethernet |
| Nozzle Temperature | up to 300°C |
| Bed Temperature | up to 110°C |
| Supported Materials | PLA, ABS, PETG, Nylon, Wood |
| Print Speed | up to 200 mm/s |
To Next Page
