Need help?Do you have a question about the CraftBot Flow and is the answer not in the manual?
General| Layer Resolution | 50 - 300 microns |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Connectivity | USB, Wi-Fi, Ethernet |
| Nozzle Temperature | up to 300°C |
| Bed Temperature | up to 110°C |
| Supported Materials | PLA, ABS, PETG, Nylon, Wood |
| Print Speed | up to 200 mm/s |
Identifies and illustrates the key physical parts of the CraftBot Flow and Flow XL printers.
Details technical specifications, including build volume, printing speed, materials, and dimensions.
Provides essential safety precautions for operating the CraftBot printer, covering electrical and physical hazards.
Step-by-step guide on how to safely unbox the CraftBot 3D printer and its components.
Lists and illustrates all the accessories included in the CraftBot printer box.
Details the assembly steps for the filament guide tube, spool holder, and power connection.
Instructions on how to power on the CraftBot printer and navigate the initial LCD screen.
Walks through the initial printer setup wizard for language, time, network, and calibration.
Visual representation of the printer's main menu and its accessible functions and settings.
Guide on preheating the print head and build plate to specific temperatures for printing.
Step-by-step instructions for inserting filament into the extruder for printing.
Procedure for safely removing filament from the extruder, requiring preheating.
Tips for switching between different filament materials, considering temperature and color changes.
Instructions on selecting and initiating a print job from internal storage or USB drive.
How to modify print parameters like temperature, speed, and fan speed during an active print.
Guide to copying, moving, and deleting files between the printer's internal storage and USB drive.
Steps for manually adjusting the build plate parallelism and nozzle distance using knobs.
Automated process to map build plate irregularities and compensate for them during printing.
Measures and adjusts Filament Monitoring System (FMS) sensor values for optimal performance.
Calibrates Z limit distance and BL-Touch to nozzle offset for printing resume and leveling.
How to safely remove printed objects from the flexible build plate by bending it.
Instructions for updating the printer's firmware via internet or flash drive.
Guide to downloading and installing the CraftWare 3D design to gcode conversion software.
Steps for using CraftWare to create print-ready gcode files from 3D models.
Instructions on accessing the printer's web interface using its IP address and default credentials.
Overview of the dashboard and main menu options for controlling the printer remotely.
How to upload gcode files to the printer using the web interface's file manager.
Steps to initiate printing of gcode files directly from the web interface.
How to access and view the printer's built-in camera feed for remote monitoring.
Instructions for cleaning the printer's metal housing and build plate.
Detailed guide on lubricating Z-axis rods and X/Y linear rails for smooth operation.
Steps to prevent and clear filament clogs from the extruder and nozzle.
Procedure for safely removing the printer nozzle for cleaning or replacement.
Instructions for troubleshooting and replacing the printer's fan assembly.
Guide for disassembling and reassembling the fan set onto the extruder assembly.
Guide on how to apply a new Kapton sheet to the build plate for optimal print adhesion.
Details the terms of product guarantee and limitations of liability for Craftunique Ltd.
To Next Page
