USER MANUAL V1.0
WWW.CRAFTBOT.COM
IMPORTANT!
Cleaning and lubrication should only be conducted while the extruder and built plate are cold. Please allow the Craft-
Bot 3D printer to cool down at least 30 minutes before cleaning or maintenance. It necessary to clean the printer after
every 1000 hour. After every 1000 hour we need to change the used and worn parts in the printer. The printer will
warn the user.
8. CLEANING AND MAINTENANCE
8.1. Cleaning
Clean the metal housing of the CraftBot by wiping with a damp cloth.
Cleaning the build plate with window cleaner or Acetone. Wipe clean with a dry cloth or paper towel.
To Next Page
Loading...
