Need help?Do you have a question about the CraftBot PLUS PRO and is the answer not in the manual?
Overview of the CraftBot printer and crucial safety guidelines.
Guide to safely unpacking the printer and identifying all included accessories.
Diagram of components and steps for initial assembly.
Powering on, interface settings, connectivity, filament loading, and leveling.
Using the AXES menu to control and home the printer's build plate and extruder.
Guide for installing and performing basic operations with the CraftWare slicing software.
Steps for printing from USB and using in-print adjustments and pausing.
Adjusting lighting, fan speeds, sound, dome settings, and FMS.
Resetting settings, enabling reporting, and updating printer firmware.
Procedures for cleaning, lubricating, fixing clogs, and nozzle removal.
Replacing Kapton sheets and guarantee information.
Details on product guarantee and limitations of manufacturer liability.
Comprehensive list of the printer's physical and software specifications.
General| Layer Resolution | 50 - 300 microns |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Frame Material | Aluminum |
| Heated Bed | Yes |
| Power Supply | 24V |
| Build Volume | 250 x 200 x 200 mm |
| Connectivity | USB |
| Supported Materials | PLA, ABS, PETG |
| Display | Color LCD |
| Nozzle Temperature | up to 260 °C |
To Next Page
