CraftBot PLUS PRO - 12 Firmware Update; Firmware Update with New Software

To Next Page

To Previous Page

USER GUIDE

12. FIRMWARE UPDATE

12.1. Firmware update with new soware

Updating the ﬁrmware adds new function(s) and improves performance. CAUTION: NEVER turn OFF the computer or

disconnect USB cable while updating the ﬁrmware.

1. Download CraPrint® soware from Craunique® website: hps://crabot.com/craware/

2. Install the CraPrint® application on your computer.

3. Download the pr3Dator® ﬁrmware ﬁle from Craunique website and extract the ZIP ﬁle on your computer. Please

read the aached Release Notes. hps://www.craunique.com/ﬁrmware

4. Connect the printer to your computer with USB cable.

5. Open the CraPrint program.

6. Select the “Load custom ﬁrmware from ﬁle” from „ …” menu.

7. Select and open the *.ﬁrmware ﬁle

8. On successful load you got message, click OK!

9. Open again the “…” menu and select Update CraBot ﬁrmware from loaded ﬁle…

Other manuals for CraftBot PLUS PRO