Craftex CX101N - Features

CX101N - 18” Variable Speed Wood & Metal Band Saw
FEATURES
As part of the growing line of Craftex woodworking & metalworking equipment, we are
proud to offer the CX101N - 18” Variable Speed Wood & Metal Band Saw. The Craftex name
guarantees Craft Excellence. By following the instructions and procedures laid out in this user
manual, you will receive years of excellent service and satisfaction. The CX101N is a profes-
sional tool and like all power tools, proper care and safety procedures should be adhered to.
Motor ................................................... 1.5 HP, 220 V Single Phase
Switch ................................................. On/Off Paddle
Variable Speed ................................... 150-3000 FPM
Cast Iron Table Size ............................ 20” x 24
Table Tilt ............................................. 0° to 10° Left and 0° to 45° Right
Wheel .................................................. 18”
Max Blade Width ................................. 1/8”
Min Blade Width .................................. 1/4”
Maximum Cutting Height ..................... 12”
Floor to Table Height.. ......................... 37-1/2”
Cutting Capacity/Throat.. ..................... 17-1/2”
Dust Collection Ports ........................... 2 Ports@ 4”
Blade Length ...................................... 133”
Bearings .............................................. Sealed and Permanently Lubricated
Computer Balanced Cast Iron Wheels ...... .Yes
Co-Planer Adjustment ......................... Yes
Powder Coated Paint .......................... Yes
Precision Ripping Fence ..................... Yes
Quick Release Tension Adjustment .... Yes
Overall size ......................................... 39.7” x 30.7” x 76.3”
Carton Size ............................. 32.6” x 19.6” x 70.7”
Weight.. .......................... N.W 157 KGS / G.W 172 KGS
Warranty ............................................. 3 Years