5
MODEL CX509 – 18" OPEN END DRUM SANDER
As part of the growing line of Craftex CX-Series woodworking equipment, we are proud to offer
CX509 a 18" Open End Drum Sander. By following the instructions and procedures laid out in
this user manual, you will receive years of excellent service and satisfaction. The CX509 is a
professional tool and like all power tools, proper care and safety procedures should be
adhered to.
Motor ........................................... 1.5HP 120Volt, 60-Hz, Single Phase
Conveyor Belt Feed Motor........... 6/49HP
Maximum Sanding Width............. 18"
Maximum Work-piece Height....... 4-1/2"
Maximum Sanding Depth ............ 1/64"
Feed Speed................................. 0 - 12 FPM
Number of Sanding Drums.......... One
Drum Speed ................................ Low 2,600 RPM, High 3,400 RPM
Dust Hood Outlet......................... One 4"
Dimensions.................................. 41-1/2" x 22-1/2" x 50"
Weight ......................................... 90 Kg
Warranty...................................... 3 Years
CX509 - 18" SANDER
FEATURES
To Next Page
Loading...
