MODEL CX617 – 12" DRILL PRESS
As part of the growing line of Craftex CX-Series metalworking equipment, we are proud to offer
the CX617, a 12" Drill Press. By following the instructions and procedures laid out in this user
manual, you will receive years of excellent service and satisfaction. The CX617 is a
professional tool and like all power tools, proper care and safety procedures should be
adhered to.
Motor .............................................. 1.5 HP, 120V, 60 Hz, 5A
Motor…………………………………..No Load Speed: 1750RPM
Type ............................................... Belt Drive
Variable Speed ............................... 530 ~ 3100 RPM (DRO)
Capacity.......................................... 6" (chuck to column), 20" (chuck to base)
Spindle Taper ................................. MT2
Spindle Travel ................................. 3-1/8”
Chuck Capacity .............................. 5/8”
Stroke ............................................. 3-18"
Laser .............................................. Class III, Transformed Powered
Table Size ....................................... 9.45” x 9.45
Table Tilt ......................................... 0 to 45° Left and Right
Overall Dimensions ........................ 21” L x 15.35” H x 37.4 H
Gross Weight / Net Weight………… 41kg / 38kg
Warranty ......................................... 3-Years
CX617 – DRILL PRESS
FEATURES
To Next Page
Loading...
