To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 137.248830 and is the answer not in the manual?
Details on the power supply needed for the table saw, including circuit protection and voltage.
Guidelines for selecting and using grounded extension cords with the table saw.
Explanation of proper grounding procedures to reduce the risk of electric shock.
Step-by-step instructions for assembling the table saw stand.
Procedure for adjusting the leveling feet on the stand for stability.
Covers height adjustment, bevel tilting, and related mechanisms.
Explains the ON/OFF switch, safety key, and overload protection.
Details on the power supply needed for the table saw, including circuit protection and voltage.
Guidelines for selecting and using grounded extension cords with the table saw.
Explanation of proper grounding procedures to reduce the risk of electric shock.
Step-by-step instructions for assembling the table saw stand.
Procedure for adjusting the leveling feet on the stand for stability.
Covers height adjustment, bevel tilting, and related mechanisms.
Explains the ON/OFF switch, safety key, and overload protection.
This manual describes the Craftsman Table Saw, a robust power tool designed for precision cutting of wood and similar materials. Its primary function is to perform both ripping (cutting along the grain) and crosscutting (cutting across the grain) operations with accuracy and safety. The table saw is engineered for stability and ease of use, making it suitable for a range of woodworking projects.
The Craftsman Table Saw is equipped with several features to enhance its versatility and user experience. For ripping operations, the rip fence is a crucial component, ensuring that the workpiece is guided parallel to the saw blade for straight and consistent cuts. The fence can be easily adjusted and locked into position, and its alignment with the miter gauge groove is critical for accurate results. The manual emphasizes the importance of proper fence alignment to prevent kickback and serious injury. For narrow stock, a push stick is provided and its use is strongly recommended to keep hands safely away from the blade.
Crosscutting operations are facilitated by the miter gauge, which allows for precise angular cuts. The miter gauge can be inserted into grooves on the table, guiding the workpiece smoothly through the blade. The manual also details how to attach a wood facing to the miter gauge for supporting longer or shorter pieces, further expanding its utility.
The saw blade itself can be adjusted for both height and bevel angle. The blade elevation handwheel allows the user to raise or lower the blade to the desired cutting depth, while the bevel tilting handwheel and lock knob enable angle adjustments for bevel cuts. Positive stops are provided for quick positioning at 90° and 45°, though fine adjustments can be made for exactness. The blade guard assembly, including a splitter and anti-kickback pawls, is designed to be in place for all through-sawing operations, significantly reducing the risk of kickback and blade contact.
For larger workpieces, the table saw features extension wings that can be installed on the sides and rear of the main table. These extensions provide additional support, which is essential for maintaining control and accuracy when cutting long or wide materials. The rear table extension can be pulled out fully for extra support during long rips.
The table saw also supports dado cuts, allowing users to create grooves or dados in a workpiece. A dedicated dado table insert is included for this purpose. When performing dado cuts, the blade guard and splitter must be removed, and extreme caution is advised. The arbor on this saw restricts the maximum dado width to 1/2 inch.
Safety is a paramount concern, and the table saw incorporates an ON/OFF switch with a removable safety key. This key prevents unauthorized or accidental startup, enhancing safety, especially in environments where children might be present. In case of motor overload or low voltage, an overload relay button is provided to reset the motor, protecting it from damage.
Regular maintenance is crucial for ensuring the longevity, safety, and optimal performance of the Craftsman Table Saw. The manual outlines several key maintenance procedures.
Cleaning is a fundamental aspect of maintenance. Users are instructed to regularly clean out all sawdust accumulated inside the saw cabinet and around the motor. This prevents potential fire hazards and motor damage, especially if the saw is mounted on a solid surface without a sawdust fall-through hole. The saw table should also be polished with automotive wax to keep it clean and reduce friction, making it easier to slide workpieces. Cutting blades should be cleaned with pitch and gum remover to maintain their sharpness and efficiency.
The electrical components also require attention. Any worn, cut, or damaged power cord must be replaced immediately to avoid electrical hazards. The manual stresses that all electrical or mechanical repairs should only be attempted by a trained repair technician, using identical replacement parts to prevent hazards.
Lubrication is another important maintenance task. The motor bearings are permanently lubricated at the factory and do not require additional lubrication. However, mechanical parts involving pivots or threaded rods, such as the blade raising and tilting mechanisms, should be lubricated with dry lubricants like graphite or silicone. This prevents sawdust from adhering, which would be an issue with oil or grease. The blade raising and tilting mechanisms should be checked for looseness, binding, or other abnormalities after every five hours of operation. Adjustments to the blade raising screw play are detailed to ensure smooth operation.
The manual also provides a comprehensive troubleshooting guide to help users diagnose and resolve common issues, such as the saw not starting, inaccurate cuts, blade pinching, or motor problems. This guide offers possible causes and corrective actions, empowering users to address minor issues themselves or determine when professional service is needed.
Overall, the Craftsman Table Saw is designed for both functionality and user safety, with clear instructions for operation and maintenance to ensure a reliable and effective tool for woodworking tasks.
General| Model Number | 137.248830 |
|---|---|
| Type | Table Saw |
| Arbor Size | 5/8 inch |
| Max RPM | 5000 RPM |
| Power Source | Corded Electric |
| Voltage | 120V |
| Amps | 15A |
| Bevel Capacity | 45 degrees |
| Blade Diameter | 10 inches |
