To Next PageTo Next Page
Need help?Do you have a question about the Craftsman MULTI-MITER 137.242760 and is the answer not in the manual?
General| Blade Diameter | 10 inches |
|---|---|
| Motor | 15 amp |
| No Load Speed | 5000 RPM |
| Dust Collection | Yes |
| Arbor Size | 5/8 inch |
| Bevel Angle Range | 45° left |
Details of the warranty provided for the tool.
Technical details and specifications of the miter saw.
Essential safety guidelines to follow before operating the power tool.
Safety rules specific to the operation of the compound miter saw.
Information on electrical connections and safety precautions.
Instructions and warnings related to unpacking the miter saw.
Step-by-step instructions for assembling the miter saw stand.
Instructions for mounting the miter saw unit onto the assembled stand.
Detailed instructions for blade removal and installation.
Step-by-step guide for safely installing a new saw blade.
Instructions for securely mounting the saw to a workbench or support.
General safety procedures for operating the miter saw.
Key checks and preparations before operating the tool.
Daily inspection steps to ensure safe operation.
Rules for safe operation, including avoiding over-reaching and handling large workpieces.
Procedure for safely starting the miter saw using the switch.
Steps for performing a miter cut using the saw's controls.
Instructions for performing a bevel cut with the miter saw.
How to perform a cut that combines miter and bevel angles.
Specific angle settings for cutting interior and exterior crown molding corners.
Common motor problems and their suggested corrective actions.
Common operational issues and their solutions.
