EasyManua.ls Logo

Craftsman 247.77763 User Manual

Craftsman 247.77763
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Owner's Manual
CRRFTSMRN
-6.5 Horse Power
Self-Propelled
CHIPPER-SHREDDER VACUUM
Model No.
247.77763
CAUTION: Before using this product,
read this manual and follow all Safety
Rules and Operating Instructions.
In
H
H
H
p
m
°
|
m
Sears, Roebuck and Co., Hoffman Estates, IL 60179, U.S.A.
770-10034
Printed in U.S.A. (8/98)
Question and Answer IconNeed help?

Do you have a question about the Craftsman 247.77763 and is the answer not in the manual?

Craftsman 247.77763 Specifications

General IconGeneral
BrandCraftsman
Model247.77763
CategoryYard Vacuum
LanguageEnglish

Summary

Warranty Information

Accessories

Product Specification

Safe Operation Practices

General Operation

Read and follow all instructions, use caution, do not allow children under 16 to operate.

Children Safety

Keep children out of work area, never allow children under 16 to operate.

Service and Fuel Safety

Handle gasoline with care, never refuel indoors, keep engine clear of debris.

Assembly

Removing From Carton

Cut carton corners, remove packing inserts and loose parts, lift front to roll unit out.

Loose Parts

Lists nozzle, chipper chute, catcher bag, safety glasses, and engine oil.

Tools Required

Lists required tools: wrenches, funnel, pliers.

Disconnecting Spark Plug

Disconnect spark plug wire to prevent accidental starting before assembly.

Attaching the Nozzle

Secure nozzle to front studs using plastic wing nuts.

Attaching the Chipper Chute

Secure chipper chute to support bracket and handles using bolts and nuts.

Attaching the Catcher Bag

Slip bag opening over discharge chute and secure straps and drawstring.

Operation

Know Your Chipper-Shredder Vacuum

Familiarize yourself with controls and adjustments before operating.

Operating Controls

Describes chipper chute, nozzle, catcher bag, drive clutch, nozzle door, wheels, primer, starter, throttle.

Stopping the Engine

Move throttle to STOP and disconnect spark plug wire.

Gas And Oil Fill-up

Fill engine with oil and fuel according to viscosity and safety guidelines.

Starting The Engine

Attach spark plug wire, set throttle, prime, and pull starter handle.

Adjusting Nozzle Height

Adjust nozzle door height using levers for different vacuuming conditions.

Related product manuals