To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 247.887791 and is the answer not in the manual?
General| Brand | Craftsman |
|---|---|
| Model | 247.887791 |
| Category | Snow Blower |
| Language | English |
Read, understand, and follow all instructions before assembly and operation. Keep manual safe.
Inspect area, remove objects, wear safety glasses, adequate clothing, and proper footwear.
Precautions for handling gasoline to avoid fire and explosion hazards.
Guidelines for safe operation, including controls, chute, and general use.
Procedure to safely clear a clogged chute using the clean-out tool.
A schedule detailing service intervals and tasks for the snow thrower.
Procedure for verifying and adding engine oil to ensure proper lubrication.
Steps for inspecting, cleaning, and gapping the spark plug for optimal performance.
Instructions on how to replace worn shave plates and skid shoes.
Guidance on lubricating key pivot points and the auger idler bracket.
How to inspect drive belts for wear and damage.
Steps for replacing the auger belt and drive belt.
Steps for safely unpacking the snow thrower from its shipping carton.
Instructions for attaching and securing the upper and lower handles.
How to adjust the skid shoes for different snow conditions.
Information on locating and using the clean-out tool for the discharge chute.
Proper inflation pressure for tires and safety warnings.
Guidance on the type of gasoline to use and refueling safety practices.
Instructions for safely adding fuel to the snow thrower's tank.
Procedure to check the engine oil level before operation.
How to adjust the direction and position of the discharge chute.
Procedures to test and adjust the auger control cable for safe operation.
How to engage and disengage the wheels for propulsion.
How to engage and disengage the auger for snow intake.
Adjusting the discharge chute direction and snow throw distance.
Understanding the function and adjustment of shave plate and skid shoes.
Explanation of the auger and chute assembly functions.
Details on choke, throttle, key, primer, and starter controls.
Steps for clearing a clogged discharge chute safely.
Essential checks and preparations before starting the engine.
Safety precautions for handling gasoline and refueling.
Step-by-step guide for starting the engine using electric or recoil starter.
Procedure for safely shutting down the engine and machine.
How to operate the snow thrower effectively to clear snow.
Advice for efficient snow removal and machine care.
Instructions for replacing shear pins if the auger strikes an obstruction.
Steps to drain fuel and prepare the engine for long-term storage.
How to clean and protect the snow thrower for off-season storage.
MTD's warranty coverage for emission-related parts.
Owner's duties regarding maintenance and care for warranty validity.
