Craftsman 247.889330 - User Manual

Questions and Answers

R
rachelgarciaAug 12, 2025
Why won't my Craftsman 247.889330 start?
- A
  Annette SmithAug 12, 2025
  If your Craftsman Lawn Mower engine won't start, several factors could be the cause. First, ensure the choke is activated by placing the throttle/choke control lever into the choke position and that the throttle/choke lever is in the fast position. Check that the spark plug wire is connected to the spark plug. The spark plug could be faulty, so clean, adjust the gap, or replace it. The fuel tank might be empty or contain stale fuel, so fill it with clean, fresh gasoline. Finally, a blocked fuel line could be the issue, in which case you should have the fuel line cleaned by a Sears service dealer.
A
Andrew GordonAug 16, 2025
What to do if my Craftsman Lawn Mower fails to propel itself?
- K
  Kevin JacksonAug 16, 2025
  If your Craftsman Lawn Mower fails to propel itself, the drive belt may be loose or damaged. Replace the drive belt.
D
davispaulAug 19, 2025
What to do if my Craftsman Lawn Mower engine runs erratically?
- S
  Susan ReedAug 19, 2025
  If your Craftsman Lawn Mower engine runs erratically, there are several possible causes. Make sure the unit is not running with the choke applied; if it is, move the throttle/choke lever out of the choke position. Check the spark plug wire to ensure it is connected and tight. Stale fuel can also cause this issue, so fill the tank with fresh gasoline. Additionally, water or dirt in the fuel system could be the problem; drain the fuel and refill with fresh fuel. Lastly, a dirty air cleaner can cause the engine to run erratically, so replace the air cleaner cartridge.
W
willisrichardAug 23, 2025
Why is my Craftsman 247.889330 Lawn Mower engine overheating?
- B
  Brianna NguyenAug 23, 2025
  If your Craftsman Lawn Mower engine is overheating, it could be due to a low engine oil level. Fill the engine with the proper amount and type of oil. Another cause could be restricted airflow. Clean any grass clippings and debris from around the engine’s cooling fins and blower housing.
R
Ronnie GutierrezAug 27, 2025
What causes poor mowing performance in my Craftsman Lawn Mower?
- J
  Jared SmithAug 27, 2025
  Poor mowing performance in your Craftsman Lawn Mower can be attributed to several factors. Dull blades are a common cause, so sharpen or replace them. Broken, loose, or worn belts can also lead to poor performance, so replace the belts. Additionally, if the blades are out of balance, balance or replace them.
J
Jeremy SmithAug 31, 2025
What to do if my Craftsman Lawn Mower engine idles poorly?
- A
  Abigail BishopAug 31, 2025
  If your Craftsman Lawn Mower engine idles poorly, a fouled spark plug could be the cause. Replace the spark plug and adjust the gap. Alternatively, a dirty air cleaner might be the issue, so replace the air cleaner cartridge.
M
michellebridgesSep 4, 2025
Why does my Craftsman Lawn Mower engine hesitate at high RPMs?
- C
  Cassandra KellySep 4, 2025
  If your Craftsman Lawn Mower engine hesitates at high RPMs, it could be due to the spark plug gap being set too close. Remove the spark plug and adjust the gap.
B
Benjamin MooreSep 7, 2025
How to reduce excessive vibration in my Craftsman 247.889330 Lawn Mower?
- M
  mbyrdSep 7, 2025
  Excessive vibration in your Craftsman Lawn Mower can stem from a few issues. Start by checking the cutting blades to ensure they are tightened and balanced. If they are loose, tighten the blade and spindle; if unbalanced, balance the blade. A damaged, dull, or bent cutting blade can also cause vibration, so replace the blade if necessary. Lastly, loose hardware can contribute to vibration, so tighten all nuts and bolts.

Summary

Safety Instructions

Children

Safety precautions for children around the mower.

General Operation Safety

General safety rules for operating the lawn mower.

Slope Operation and Safety

Slope Operation Guidelines

Guidelines for safely operating the mower on slopes.

Safe Handling of Gasoline

Precautions for safe handling of gasoline.

Slope Guide

Determining Safe Slopes

Visual guide for determining safe mowing slopes.

Safety Labels

Warning Labels Overview

Identification and explanation of safety warning labels.

Owners Responsibility

Defining the owner's role in safe operation.

Assembly

Loose Parts, Tools, and Crate Removal

Lists parts, tools, and steps to remove unit from crate.

Handle and Chute Holder Assembly

Instructions for assembling handle and removing chute holder.

Assembly Adjustments

Gear Shift Lever Installation

Steps to install the gear shift lever.

Final Adjustments

Final checks, including rear tire pressure.

Know Your Mower

Control Lever Overview

Explanation of throttle, deck height, and gas cap controls.

Drive, Blade, and Engine Controls

Operation of blade, drive, and engine controls.

Operation

Gas and Oil Fill-Up

Procedures for fueling and checking oil.

Starting the Mower

Step-by-step instructions for starting the engine.

Using, Stopping, and Moving the Mower

Guidance on operating, stopping, and manually moving the mower.

Mulching or Side-Discharge Mowing

Instructions for using mulch plug or side discharge.

Service and Maintenance

General Recommendations and Engine Maintenance

General advice, spark plug, and air cleaner service.

Oil Change and Belt Cover Removal

Procedure for changing engine oil and removing belt cover.

Deck and Belt Service

Steps for removing mower deck and belt service.

Lubrication and Cleaning

Lubrication points and deck cleaning procedures.

Tire Pressure and Shield Replacement

Checking rear tire pressure and replacing trailing shield.

Servicing Cutting Blades

Blade Removal, Sharpening, and Installation

Complete guide for blade servicing.

Replacing Belts

Drive and Deck Engagement Belts

Procedures for replacing drive and deck engagement belts.

Blade Timing Belt

Instructions for replacing the blade timing belt.

Off-Season Storage

Engine and Mower Preparation

Steps for preparing engine and mower for storage.

Troubleshooting

Engine Starting Problems

Solutions for engine failure to start.

Engine Operation Problems

Troubleshooting for erratic running, overheating, hesitation.

Mower Performance Issues

Addressing vibration, propulsion, and mowing performance.

Parts List

Mower Components

Illustrated parts for the main mower assembly.

Engine Components

Illustrated parts for the engine.

Transmission Components

Illustrated parts for the transmission.

Warranty Information

Emission Control Warranty Details

Specifics on emission control system warranty coverage.

Owners Warranty Responsibilities

Owner's duties for maintenance and claims.

Emissions Label Information

Emissions Durability Period Explanation

Understanding engine hours for emissions compliance.

Air Index Interpretation

Understanding the relative level of engine emissions.

Sears Service and Support

In-Home Repair Services

Information on Sears in-home repair services.

Carry-In Repair Services

Information on Sears carry-in repair services.

Protection Agreements

Information on purchasing protection agreements.

Craftsman 247.889330 Specifications

General

Engine Type	4-cycle
Engine	Briggs & Stratton
Engine Power	6.75 ft-lbs Gross Torque
Cutting Width	21 inches
Cutting Height Positions	6
Deck Material	Steel
Weight	65 lbs
Oil Capacity	20 oz
Starter Type	Recoil
Mulching Capability	Yes
Bagging Capability	Yes
Side Discharge Capability	Yes
Cutting Height	1.25-3.75 inches
Wheel Size	7 inches (front), 8 inches (rear)
Fuel Tank Capacity	1.6 quarts