To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 315.220381 and is the answer not in the manual?
Specific safety precautions for operating radial arm saws.
Guidelines for selecting and using appropriate extension cords.
Explains proper grounding for reducing electric shock risk.
Instructions for converting the saw from 120V to 240V.
Describes repositionable spacer and rear tables for flexibility.
Pawls that snag work to prevent kickback during rip cuts.
Device that limits carriage speed and prevents saw climbing.
Keeps cut edges from binding, preventing kickback.
Step-by-step guide to assemble the saw's leg stand.
Instructions for securely attaching the saw base to the leg stand.
Guide to install the yoke assembly onto the carriage track.
Procedure to ensure snug fit and remove looseness in the column.
Centering the riving knife with the blade for safe rip cuts.
Ensures the arm is at 0° for accurate cross cuts.
Aligns the miter angle of the blade to the fence for safety.
Squares the blade to the table for accurate 90° bevel cuts.
Explains power switch and key usage for safe operation.
Provides methods to prevent dangerous workpiece kickback.
Step-by-step guide for performing a standard cross cut.
Step-by-step guide for performing a rip cut safely.
Routine cleaning and checks for overall saw condition.
Maintenance related to the motor and electrical components.
General