Craftsman 315.228310 User Manual

1
®
TABLE SAW 315.228310
972000-524
7-99
Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA
Visit the Craftsman web page: www.sears.com/craftsman
Save this manual for
future reference
• Safety
• Features
• Assembly
• Operation
• Maintenance
• Parts List
CAUTION: Read and follow all
Safety Rules and Operating
Instructions before first use of this
product.
10 in. Stationary
TABLE SAW
Model No.
315.228310
Owner's Manual
Customer Help Line: 1-800-932-3188
NRTL/C

Craftsman 315.228310 Specifications

General

Brand	Craftsman
Model	315.228310
Category	Saw
Language	English

Summary

Warranty

Rules For Safe Operation

Electrical

Grounding Instructions

Essential safety procedure for preventing electric shock.

Assembly

Assembling Leg Stand

Instructions for building the saw's support leg stand.

Mounting the Leg Stand on the Table Saw Base

Aligning the Rip Fence and Front Rail

Mounting the Motor

Steps for installing the saw's motor assembly.

Installing the Blade Guard

Crucial step for installing the safety blade guard.

Aligning the Riving Knife with the Blade

Proper alignment of the riving knife for safety and performance.

Checking Rip Fence and Blade Alignment

Verifying the alignment of the rip fence and blade for accuracy.

Adjustments

Replacing the Blade

Detailed instructions for safely removing and installing a new saw blade.

Heeling (Paralleling) the Sawblade to the Miter Gage Groove

Adjusting the blade to be parallel with the miter gage groove to prevent binding.

Setting the Bevel Stops and Indicator

Adjusting the Miter Gage

Operation

Basic Operation of the Table Saw

Causes of Kickback

Explains common reasons for dangerous kickback incidents.

Avoiding Kickback

Essential safety practices to prevent kickback.

Making a Cross Cut

Making a Rip Cut

Making a Miter Cut

Making a Bevel Cross Cut

Making a Bevel Rip Cut

Making a Compound (Bevel) Miter Cut

Maintenance

General Maintenance

Troubleshooting