To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 316.350220 and is the answer not in the manual?
Key safety guidelines and precautions to follow before and during chainsaw use.
Emphasizes the importance of reading and understanding the entire manual for safe operation.
Provides essential safety measures for handling gasoline and fuel mixtures to prevent fire hazards.
Explains kickback hazards and provides techniques to reduce the risk of injury.
Additional safety measures covering one-handed operation, fatigue, protective gear, and bystander safety.
Critical guidelines for safe refueling practices, storage, and handling of flammable fuels.
Explanation of safety symbols and pictographs used throughout the manual for hazard identification.
Detailed explanation of kickback types: pinch and rotational kickback, with diagrams.
Identifies and lists the various parts of the chainsaw with corresponding numbers.
Highlights key safety mechanisms integrated into the chainsaw design and their functions.
Guidance on the correct ratio and procedure for mixing 2-cycle engine oil and gasoline.
Specific ratios and measurements for mixing unleaded gasoline with 2-cycle engine oil.
Pre-operation checks and information required before starting the chainsaw engine.
Detailed instructions on how to safely refuel the chainsaw with the correct fuel mixture.
Explanation of the chain brake mechanism and its proper engagement and disengagement.
Step-by-step guide for starting the chainsaw when the engine is cold.
Instructions for starting the chainsaw when the engine is already warm.
Procedure to test the functionality and effectiveness of the chainsaw's chain brake.
Importance and method of ensuring adequate lubrication for the saw chain and guide bar.
Techniques and safety procedures for cutting down trees, including notching and felling cuts.
Instructions for removing branches from a felled tree safely and effectively.
Guidance on cutting a felled log into manageable lengths, including proper support and cutting techniques.
Recommended maintenance tasks and their frequencies for optimal chainsaw performance.
A comprehensive checklist of items to inspect and maintain before, after, and during operation.
Step-by-step instructions for safely removing the guide bar and saw chain from the chainsaw.
Detailed procedure for installing a new guide bar and saw chain onto the chainsaw.
Guide on how to properly adjust and maintain the tension of the chainsaw's saw chain.
Procedure to test the functionality of the chain brake mechanism.
Instructions for cleaning and maintaining the air filter to ensure proper engine performance.
Guidance on replacing the fuel filter to prevent engine issues.
Instructions for draining the oil reservoir and replacing the oil filter.
Information on spark plug cleaning, gapping, and replacement for optimal engine ignition.
Procedure for cleaning or replacing the spark arrester screen to maintain engine performance.
Proper procedures for storing the chainsaw for periods longer than 30 days.
Instructions on how to lubricate the guide bar sprocket tip for proper performance and longevity.
Recommendations for maintaining the guide bar to minimize wear and ensure proper chain function.
Guidance on checking chain tension, break-in, and general care for the saw chain.
Diagnosing and resolving issues when the chainsaw fails to start or run properly.
Troubleshooting steps for an engine that starts but lacks power.
Identifying causes and solutions when the engine hesitates or stumbles.
Addressing problems where the engine loses power when subjected to a load.
Solutions for issues causing the engine to run unevenly or erratically.
Diagnosing and fixing causes of excessive smoke from the engine.
Technical details and specifications for the chainsaw's engine.
Outlines the owner's duties regarding maintenance and care for warranty coverage.
Details the warranty period and coverage for the chainsaw's components.
General